Bitget to adjust the leverage, position tiers, and maintenance margin rate for perpetual futures pairs: USUSDT, SPKUSDT, SIGNUSDT, PARTIUSDT, MASKUSDT, BIOUSDT, and BEAMUSDT
現在の記事は、選択した言語をサポートしていません。自動的に英語が推奨されています。
Bitget to adjust the leverage, position tiers, and maintenance margin rate for perpetual futures pairs: USUSDT, SPKUSDT, SIGNUSDT, PARTIUSDT, MASKUSDT, BIOUSDT, and BEAMUSDT
2026-04-28 08:13
57674シェア
On April 29, 2026, 6:00 PM (UTC+8), Bitget will adjust the leverage, position tiers, and maintenance margin rate for the following perpetual futures pairs: USUSDT, SPKUSDT, SIGNUSDT, PARTIUSDT, MASKUSDT, BIOUSDT, and BEAMUSDT. Existing positions opened before the update will be affected. Adjust your positions based on the updated position tiers, leverage, and maintenance margin rate to avoid liquidation.
Details are as follows:
| Before adjustment | After adjustment | ||||
| Position tier | Leverage | Maintenance margin rate | Position tier | Leverage | Maintenance margin rate |
| USUSDT | |||||
| 0–5000 | 25 | 0.02 | 0–5000 | 10 | 0.0500 |
| 5000–25,000 | 20 | 0.025 | 5000–10,000 | 8 | 0.0700 |
| 25,000–100,000 | 10 | 0.05 | 10,000–30,000 | 6 | 0.0900 |
| 100,000–300,000 | 5 | 0.1 | 30,000–50,000 | 5 | 0.1000 |
| 300,000–500,000 | 4 | 0.125 | 50,000–100,000 | 4 | 0.1250 |
| 500,000–1,500,000 | 2 | 0.3 | 100,000–500,000 | 2 | 0.3000 |
| 1,500,000–2,500,000 | 1 | 0.6 | 500,000–1,000,000 | 1 | 0.6000 |
| SPKUSDT | |||||
| 0–5000 | 75 | 0.0100 | 0–5000 | 50 | 0.0100 |
| 5000–10,000 | 50 | 0.0150 | 5000–10,000 | 25 | 0.0200 |
| 10,000–50,000 | 25 | 0.0200 | 10,000–30,000 | 20 | 0.0250 |
| 50,000–100,000 | 20 | 0.03 | 30,000–50,000 | 15 | 0.0400 |
| 100,000–250,000 | 10 | 0.05 | 50,000–100,000 | 10 | 0.0500 |
| 250,000–750,000 | 5 | 0.12 | 100,000–200,000 | 5 | 0.1000 |
| 750,000–1,500,000 | 4 | 0.15 | 200,000–300,000 | 4 | 0.1250 |
| 1,500,000–7,500,000 | 2 | 0.3 | 300,000–1,000,000 | 2 | 0.3000 |
| 7,500,000–12,000,000 | 1 | 0.6 | 1,000,000–5,000,000 | 1 | 0.6000 |
| SIGNUSDT | |||||
| 0–5000 | 75 | 0.0100 | 0–5000 | 50 | 0.0100 |
| 5000–10,000 | 50 | 0.0150 | 5000–10,000 | 25 | 0.0200 |
| 10,000–25,000 | 25 | 0.0200 | 10,000–30,000 | 20 | 0.0250 |
| 25,000–50,000 | 20 | 0.03 | 30,000–50,000 | 15 | 0.0400 |
| 50,000–125,000 | 10 | 0.05 | 50,000–100,000 | 10 | 0.0500 |
| 125,000–250,000 | 5 | 0.12 | 100,000–200,000 | 5 | 0.1000 |
| 250,000–500,000 | 4 | 0.15 | 200,000–500,000 | 4 | 0.1250 |
| 500,000–7,500,000 | 2 | 0.3 | 500,000–1,000,000 | 2 | 0.3000 |
| 7,500,000–12,500,000 | 1 | 0.6 | 1,000,000–5,000,000 | 1 | 0.6000 |
| PARTIUSDT | |||||
| 0–5000 | 50 | 0.0150 | 0–5000 | 20 | 0.0250 |
| 5000–10,000 | 25 | 0.0200 | 5000–10,000 | 15 | 0.0400 |
| 10,000–30,000 | 20 | 0.0250 | 10,000–50,000 | 10 | 0.0500 |
| 30,000–50,000 | 15 | 0.0400 | 50,000–100,000 | 5 | 0.1200 |
| 50,000–100,000 | 10 | 0.0500 | 100,000–300,000 | 4 | 0.1500 |
| 100,000–200,000 | 5 | 0.1200 | 300,000–1,000,000 | 2 | 0.3000 |
| 200,000–350,000 | 4 | 0.1500 | 1,000,000–3,000,000 | 1 | 0.6000 |
| 350,000–7,500,000 | 2 | 0.3000 | |||
| 7,500,000–12,500,000 | 1 | 0.6000 | |||
| MASKUSDT | |||||
| 0–5000 | 75 | 0.0100 | 0–5000 | 50 | 0.0100 |
| 5000–10,000 | 50 | 0.014 | 5000–10,000 | 25 | 0.0200 |
| 10,000–15,000 | 25 | 0.025 | 10,000–15,000 | 20 | 0.0250 |
| 15,000–30,000 | 20 | 0.03 | 15,000–30,000 | 15 | 0.0400 |
| 30,000–300,000 | 10 | 0.05 | 30,000–50,000 | 10 | 0.0500 |
| 300,000–1,500,000 | 5 | 0.12 | 50,000–100,000 | 5 | 0.1200 |
| 1,500,000–2,000,000 | 4 | 0.15 | 100,000–300,000 | 4 | 0.1500 |
| 2,000,000–5,500,000 | 2 | 0.3 | 300,000–1,000,000 | 2 | 0.3000 |
| 5,500,000–10,000,000 | 1 | 0.6 | 1,000,000–5,000,000 | 1 | 0.6000 |
| BIOUSDT | |||||
| 0–5000 | 75 | 0.0100 | 0–10,000 | 50 | 0.0150 |
| 5000–10,000 | 50 | 0.0150 | 10,000–30,000 | 25 | 0.0200 |
| 10,000–50,000 | 25 | 0.025 | 30,000–50,000 | 20 | 0.0250 |
| 50,000–100,000 | 20 | 0.03 | 50,000–100,000 | 10 | 0.0500 |
| 100,000–250,000 | 10 | 0.05 | 100,000–200,000 | 5 | 0.1200 |
| 250,000–750,000 | 5 | 0.12 | 200,000–300,000 | 4 | 0.1500 |
| 750,000–1,500,000 | 4 | 0.15 | 300,000–1,000,000 | 2 | 0.3000 |
| 1,500,000–7,500,000 | 2 | 0.3 | 1,000,000–5,000,000 | 1 | 0.6000 |
| 7,500,000–12,500,000 | 1 | 0.6 | |||
| BEAMUSDT | |||||
| 0–5000 | 50 | 0.0150 | 0–5000 | 20 | 0.0250 |
| 5000–10,000 | 25 | 0.0250 | 5000–10,000 | 15 | 0.0400 |
| 10,000–50,000 | 15 | 0.0400 | 10,000–50,000 | 10 | 0.0500 |
| 50,000–100,000 | 10 | 0.0500 | 50,000–100,000 | 5 | 0.1200 |
| 100,000–200,000 | 5 | 0.1200 | 100,000–300,000 | 4 | 0.1500 |
| 200,000–500,000 | 4 | 0.1500 | 300,000–1,000,000 | 2 | 0.3000 |
| 500,000–1,000,000 | 2 | 0.3000 | 1,000,000–3,000,000 | 1 | 0.6000 |
| 1,000,000–5,000,000 | 1 | 0.6000 | |||
Note:
1. New futures positions of USUSDT, SPKUSDT, SIGNUSDT, PARTIUSDT, MASKUSDT, BIOUSDT, and BEAMUSDT will directly adopt the new position tier standards.
2. For existing positions in USUSDT, SPKUSDT, SIGNUSDT, PARTIUSDT, MASKUSDT, BIOUSDT, and BEAMUSDT, the new position tier standards will take effect on May 2, 2026, 6:00 PM (UTC+8).
-
To avoid liquidation due to changes in the maintenance margin rate, top up your margin or adjust your positions in advance.
-
Since position data will be calculated based on the new standards, your maintenance margin rate may display as greater than 100%. This means that your position needs to be adjusted promptly.
-
Trading bots: Trading bots with positions and leverage higher than the adjusted parameters may be terminated. We strongly recommend adjusting or terminating the bots in advance to prevent potential losses.
For more details, refer to the futures position tiers.
Thank you for your support and understanding. We apologize for any inconvenience this may cause.
*本公告は時間的制約のある内容です。公開日をご確認ください。状況の変化や内容の陳腐化により生じたいかなる直接的または間接的な損失についても、当プラットフォームは一切の責任を負いません。
関連記事
Bitget、KAIAUSDT無期限先物の資金調達率の間隔を調整Bitgetが KAIAUSDT無期 限先物の最小および最大資金調達率を調整Bitget、ARKUSDT無期限先物の資金調達率の間隔を調整Bitget、ONEUSDT無期限先物の資金調達率の間隔を調整Bitgetが SANDUSDT無期限先物の最小および最大資金調達率を調整Bitget、ARKUSDT無期限先物の資金調達率の間隔を調整Bitget、LSKUSDT無期限先物の資金調達率の間隔を調整Bitget、ONEUSDT無期限先物の資金調達率の間隔を調整Bitget、GUSDT無期限先物の資金調達率の間隔を調整BitgetのBTWUSDT無期限先物取引の価格の刻み幅調整のお知らせ
役に立ちましたか？